7050 Aircraft Aluminum for Cargo Floor Beams
Why Choose 7050 Aluminum for Aircraft Cargo Hold Floor Beams
1. High Strength
The tensile and yield strengths of 7050 aluminum alloy surpass many other aluminum alloys, enabling it to withstand heavy loads and ensuring sufficient support capability for the cargo hold during transport, preventing structural deformation or damage.
2. Lightweight Characteristics
Despite its high strength, 7050 aluminum alloy has a low density, effectively reducing the overall weight of the structure while maintaining strength. This is crucial for aircraft and heavy transport vehicles, as weight reduction can improve fuel efficiency and payload capacity.
3. Good Corrosion Resistance
With appropriate heat treatment and surface treatment, 7050 aluminum alloy provides good corrosion resistance, adapting to various environmental conditions and extending its lifespan.
4. Excellent Machinability
7050 aluminum alloy can be processed through conventional machining techniques, accommodating complex design requirements. Its good weldability also facilitates connection and assembly.
5. Superior Fatigue Performance
7050 aluminum alloy exhibits good fatigue strength under cyclic loads, making it suitable for applications requiring frequent load changes, such as the dynamic loads cargo hold floor beams may experience during transport.
6. Heat Treatment
7050 aluminum alloy is typically subjected to heat treatment processes such as T7451 to enhance its mechanical properties and stability, ensuring reliability in high-load and high-temperature environments.
In the design of cargo hold floor beams, 7050 aluminum alloy is widely used in civil aircraft, cargo planes, and other heavy transport vehicles' floor structures. These beams must not only support the weight of the cargo but also resist various stresses and vibrations generated during flight and transport.
The chemical composition of 7075 aerospace grade aluminum sheet plate
| Element | Composition(%) |
| Si | 0.40 |
| Fe | 0.50 |
| Cu | 1.2-2.0 |
| Mn | 0.30 |
| Mg | 2.1-2.9 |
| Cr | 0.18-0.28 |
| Zn | 5.1-6.1 |
| Ti | 0.20 |
| Other | 0.20 |
| Al | Remainder |
The specification of Haomei 7075 aerospace aluminum sheet plate
- Alloy: 7075
- Temper: F, O, H112, T3, T4, T42, T62, T6, T351, T651, T7351, T7651, T7451 etc.
- Thickness: 1.0-500mm
- Width: 500-2800mm
- Length: 500-16000mm
Haomei 7050 Aluminum Plate Inventory
| Describe | Size (in) |
| 0.25" AMS 4050 7050 T7451 Aluminum Plate | 48" x 120" |
| 0.25" AMS 4050 7050 T7451 Aluminum Plate | 18" x 120" |
| 0.25" AMS 4050 7050 T7451 Aluminum Plate | 10" x 72" |
| 0.25" AMS 4050 7050 T7451 Aluminum Plate | 6" x 48" |
| 0.5" AMS 4050 7050 T7451 Aluminum Plate | 48" x 96" |
| 0.5" AMS 4050 7050 T7451 Aluminum Plate | 18" x 96" |
| 0.5" AMS 4050 7050 T7451 Aluminum Plate | 10" x 60" |
| 0.5" AMS 4050 7050 T7451 Aluminum Plate | 6" x 24" |
| 0.75" AMS 4050 7050 T7451 Aluminum Plate | 48" x 72" |
| 0.75" AMS 4050 7050 T7451 Aluminum Plate | 18" x 72" |
| 0.75" AMS 4050 7050 T7451 Aluminum Plate | 10" x 48" |
| 0.75" AMS 4050 7050 T7451 Aluminum Plate | 6" x 12" |
| 1" AMS 4050 7050 T7451 Aluminum Plate | 48" x 60" |
| 1" AMS 4050 7050 T7451 Aluminum Plate | 48" x 48" |
| 1" AMS 4050 7050 T7451 Aluminum Plate | 18" x 60" |
| 1" AMS 4050 7050 T7451 Aluminum Plate | 18" x 48" |
| 1" AMS 4050 7050 T7451 Aluminum Plate | 10" x 24" |
| 1" AMS 4050 7050 T7451 Aluminum Plate | 10" x 12" |
| 1" AMS 4050 7050 T7451 Aluminum Plate | 4" x 120" |
| 1" AMS 4050 7050 T7451 Aluminum Plate | 4" x 96" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 36" x 120" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 36" x 96" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 36" x 72" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 36" x 60" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 18" x 24" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 18" x 18" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 12" x 120" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 12" x 96" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 8" x 120" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 8" x 96" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 8" x 72" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 8" x 60" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 4" x 72" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 4" x 60" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 4" x 48" |
| 1.25" AMS 4050 7050 T7451 Aluminum Plate | 4" x 24" |
| 1.5" AMS 4050 7050 T7451 Aluminum Plate | 24" x 120" |
| 1.5" AMS 4050 7050 T7451 Aluminum Plate | 24" x 96" |
| 1.5" AMS 4050 7050 T7451 Aluminum Plate | 12" x 72" |
| 1.5" AMS 4050 7050 T7451 Aluminum Plate | 12" x 60" |
| 1.5" AMS 4050 7050 T7451 Aluminum Plate | 8" x 48" |
| 1.5" AMS 4050 7050 T7451 Aluminum Plate | 8" x 24" |
| 1.5" AMS 4050 7050 T7451 Aluminum Plate | 4" x 12" |
| 1.75" AMS 4050 7050 T7451 Aluminum Plate | 24" x 72" |
| 1.75" AMS 4050 7050 T7451 Aluminum Plate | 24" x 60" |
| 1.75" AMS 4050 7050 T7451 Aluminum Plate | 12" x 48" |
| 1.75" AMS 4050 7050 T7451 Aluminum Plate | 12" x 24" |
| 1.75" AMS 4050 7050 T7451 Aluminum Plate | 8" x 12" |
| 1.75" AMS 4050 7050 T7451 Aluminum Plate | 6" x 120" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 24" x 48" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 24" x 36" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 24" x 24" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 12" x 12" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 10" x 120" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 10" x 96" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 6" x 96" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 6" x 72" |
| 2.0" AMS 4050 7050 T7451 Aluminum Plate | 6" x 60" |
Users viewing this material also viewed the following
-
7050 T7451 Aircraft Aluminum Plate Sheet
7050 T7451 aircraft aluminum plate is a zinc alloy aluminum alloy, mainly used for structural parts that require high strength and corrosion resistance.
-
7050 T74511 T76511 T73511 Aerospace Aluminum Bars
7050 aerospace aluminum bar is a high-strength aluminum alloy, widely used in the aerospace, military, and high-performance industrial sectors.
-
7050 Aerospace Grade Aluminum Forging
7050 aluminum forgings are widely used in the manufacture of fuselage structural parts, wing beams, landing gear components, etc. due to their excellent strength, corrosion resistance and weldability.
-
7050 Aerospace Aluminum Profile Extrusion
7050 aluminum alloy profiles are suitable for producing large structural components with thick cross-sections, such as aircraft wing beams, fuselage frames, landing gear, and supporting structures.
